- System ampere-hour range – 104 to 4800 Ah to 1.75 VPC at 8-hour rate @ 25°C (77°F)
- Electrolyte – 1.310 specific gravity acid (nominal)
- Safety vent – 3-10 psi opening pressure, self-resealing
- Terminals – Solid copper insert
- Positive plate – Patented lead calcium tin silver alloy
- Negative plate – Lead calcium grid alloy
- 20 years design life in float applications at 25°C (77°F)
- 1200 cycles to 80% DOD at 25°C (77°F)
- Temperature excursions between -40°C (-40°F) to +50°C (122°F) allowed
- Self-discharge – 0.5 to 1% per week maximum @ 25°C (77°F)
- Float voltage – 2.23 to 2.27 VPC
- Polypropylene is standard. Flame retardant
- Enhanced post access for maintenance and battery health assessment
Key Features
The Absolyte GP battery features a valve-regulated lead-acid (VRLA) design. It will not require water additions for the life of the battery. The Absolyte GP VRLA design is inherently safer than conventional flooded lead-acid batteries. This design minimizes hydrogen gas release, and virtually eliminates acid misting and acid leakage. Tests have shown that 99% or more of generated gases within each Absolyte battery are recombined within the cell under normal operating conditions.
GNB Absolyte Batteries include Seismic Zone 4 Racking and covers. Ideal for larger off grid or solar grid tie battery backup systems. Protective steel tray housings offer maximum installation flexibility. The GNB Absolyte GP is qualified to stack horizontally up to eight high for use in 1997 UBC/2001 CBC Seismic Zone IV (at or below grade). This provides for high capacity in a small footprint and frees up floor space for other equipment. These batteries are sealed hence they do not require a separate battery room.
GNB Absolyte
- 2-volt battery available as either a single cell or system design
- Wide range of capacities with ratings from 91– 2000 AH @ 8 hours to 1.75 v.p.c.
- Exclusive IPF® Technology optimizes power capacity, cell consistency, and long-term reliability
- Advanced AGM technology eliminates periodic watering, corrosive acid fumes, and spills
- MicroCat Catalyst lowers float current, decreases internal temperatures, and the risk of dryout
- Epoxy-sealed posts eliminate leaks
- Flame arresting, low pressure, self-sealing valves are all 100% factory tested
Key Features
For questions on products or pricing Contact Us
Deka Unigy 2 Batteries are constructed using the finest quality materials and state-of-the-art manufacturing techniques and are known for their high reliability and superior performance. The Deka Unigy II 2-volt battery is available as either a single cell or system design, and features a wide range of capacities with ratings from 91 – 2000 AH @ 8 HR. to 1.75 v.p.c.
Deka Unigy 2 Series
This battery module line utilizes a smaller footprint and a real space saver! They save space while providing optimal power. The new reduction in space enables less restriction for ground and vertical space confinements and meets the latest UBC97 Zone 4 specifications, certified up to 8 modules high. Assembly is quick and easy with a simplified, yet advanced layout configuration and "two-way" post design allowing quick connector assembly and optimized current transfer.
2 Volt VRLA Batteries
For questions on products or pricing Contact Us